700 Texitunnel
Back (Selection list)
THE MOST POPULAR MODEL

The Panther 700 Texitunnel is a low cost,high efficiency t-shirt dryer suitable for any small or medium size t-shirt printing company using mainly "plastisol" printing inks.Good for t-shirts, sweatshirts, working clothes, umbrellas and many more things.

The 700 is available in 1 phase 220/240V at 30 amps or 3 phase 10 amps per phase.
This model is normally in stock.
CLICK for details   CLICK for details
Front view of the 700 Texitunnel.( Basic model) Side view of a 700 Texitunnel with the control bcx on top and an extra 40 cm conveyor outlet.
CLICK for details CLICK for details
Front view of a 700 Texitunnel with the control bcx on top and an extra 40 cm conveyor outlet.   Side view of a 700 Texitunnel with the control bcx on top and an extra 40 cm conveyor outlet.
 700 Specifications
Length  
Overall 2metres
Inlet 59cm
Tunnel 109cm
Outlet 33cm
Width  
Maximum with control 97cm
box on the side  
Maximum with control 92cm
box on the top  
Tunnel (outside) 77cm
Transportband 70cm
Heaters 51.5cm

Electrical details 3phase

380volts
KW (total) 7.4 kw
Average power use 1.6 kw
per phase per hour  
Maximum power 11 amps
requirement per phase  
Process rates  
Normal plastisol 300 to 500
Low temp. plastisol 350 to 600
Air drying water 300 to 600
based inks  
Heat cured water 2 passes
based inks  
Belt speed in m/min 0.4 to3.4