| 700LW Texitunnel | Back (Selection list) |
|
|
|
The 700LW Texitunnel has a tunnel that is 50% longer and 50% wider than the basic 700 Texitunnel.The inlet and outlet are also longer. This dryer is ideal for printers who print t-shirts and larger cut pieces and who use a small automatic caurosel. The picture shows a 700LW Texitunnel with the control box mounted on the side of the tunnel.Colour "Signal Blue" RAL 5005.We normally build this model to order, delivery time is about 4 weeks.
|
|
| 700 LW Specifications | |
| Length | |
| Overall | 3.05metres |
| Inlet | 70cm |
| Tunnel | 159cm |
| Outlet | 79cm |
| Width | |
| Maximum with control | 117cm |
| box on the side | |
| Maximum with control | 112cm |
| box on the top | |
| Tunnel (outside) | 97cm |
| Transportband | 90cm |
| Heaters | 78cm |
| Electrical details 3 ph. | 380volts |
| KW (total) | 15.6 kw |
| Average power use | 3.4 kw |
| per phase per hour | |
| Maximum power | 24 amps |
| requirement per phase | |
| Process rates | |
| Normal plastisol | 500 to 700 |
| Low temp. plastisol | 600 to 800 |
| Air drying water based | 500 to 700 |
| inks | |
| Heat cured water | see details |
| based inks | |
| Belt speed in m/min | 0.4 to 4.2 |