 |
| The
700W Texitunnel has 78cm wide heating elements, 50% wider than
the 700 Texitunnel.The inlet and outlet are also longer making
it easier to handle larger pieces. |
This dryer is better
for small printing companies that print cut pieces of material with
prints bigger than 50cm. |
| We
normally have one of these dryers in stock.Colour red. |
|
|
| 700
W Specifications |
|
| Length |
|
| Overall |
2.4metres |
| Inlet |
70cm |
| Tunnel |
109cm |
| Outlet |
51cm |
| Width |
|
| Maximum
with control |
117cm |
| box on the side |
|
| Maximum
with control |
112cm |
| box on the top |
|
| Tunnel
(outside) |
97cm |
| Transportband |
90cm |
| Heaters |
78cm |
| Electrical
details 3 phase |
380 volts |
| KW
(total) |
11 kw |
| Average
power use |
2.5 kw |
| per phase per hour |
|
| Maximum
power |
17 amps |
| requirement per
phase |
|
| Process
rates |
|
| Normal
plastisol |
300 to
500 |
| Low
temp. plastisol |
350 to
600 |
| Air drying water
based |
300 to 600 |
| inks |
|
| Heat cured water |
2 passes |
| based inks |
|
| Belt
speed in m/min |
0.4 to
3.4 |
|
|
|
|