 |
|
| THIS IS ONE OF THE MOST POPULAR MODELS IN THE 8000 SERIES OF TEXITUNNELS | |
|
The 8220 Texitunnel has been very popular with printers who use 2 hand carousels or have an automatic carousel printing mainly plastisol prints on t-shirts at rates of about 600+ t-shirts per hour.It will also dry and fix waterbased inks like "Texiscreen" in 1 pass at rates of 150 to 300 shirts per hour depending upon the print area.This is fast enough for a hand printer printing water based inks. |
|
 |
 |
| PRESS picture for details | PRESS picture for details |
| 8220 Specifications | |
| Length | |
| Overall | 3.8metres |
| Inlet | 75cm |
| Tunnel | 218cm |
| Outlet | 80cm |
| Width | |
| Maximum | 94cm |
| Tunnel (outside) | 85cm |
| Transportband | 70cm |
| Heaters | 51.5cm |
| Electrical details 3 phase | 380volts |
| KW (total) installed | 13.4 kw |
| Average power use | 3.0 kw |
| per phase per hour | |
| Maximum power | 20.5 amps |
| requirement per phase | |
| Process rates | |
| Normal plastisol | 600 to 850 |
| Low temp. plastisol | 800+ |
| Air drying water based | 500 to 900 |
| inks | |
| Heat cured water | 150 to 300 |
| based inks | |
| Belt speed in m/min | 0.6 to 6.0 |