8230 Texitunnel Back (Selection list)
THIS IS ONE OF THE MOST POPULAR MODELS IN THE 8000 SERIES OF TEXITUNNELS
Like the 8220 Texitunnel the 8230 Texitunnel has been very popular with printers who use 2 hand carousels or have an automatic carousel printing mainly plastisol prints on t-shirts at rates of about 600+ t-shirts per hour.It will also dry and fix waterbased inks like "Texiscreen" in 1 pass at rates of 150 to 300 shirts per hour depending upon the print area.This is fast enough for a hand printer printing water based inks.
The 8230 has heating elements that are 50% wider (78cm)than the 8220 model.This makes it easier to use with large pieces.
 8230 Specifications  
Length  
Overall 3.8metres
Inlet 75cm
Tunnel 218cm
Outlet 80cm
Width  
Maximum 114cm
Tunnel (outside) 105cm
Transportband 90cm
Heaters 78cm
Electrical details 3 phase 380volts
KW (total) installed 20 kw
Average power use 4.4 kw
per phase per hour  
Maximum power 30 amps
requirement per phase  
Process rates  
Normal plastisol 600 to 850
Low temp. plastisol 800+
Air drying water based 500 to 900
inks  
Heat cured water 150 to 300
based inks  
Belt speed in m/min 0.6 to 6.0
CLICK for details CLICK for details CLICK for details
8230 Texitunnel 8230 Texitunnell 8230 Texitunnel
conveyor inlet front view conveyor outlet