|
|
| The
8260 Texitunnel is designed for printers printing large pieces.T-shirt
printers can dry 2 lines of t-shirts in the tunnel. |
| |
| We
can also make an 8270 Texitunnel with heating elements 185cm wide.The
power requirements of the 8270 are the same as the 8260.Slightly less
powerfull heating elements are used. |
|
|
|
|
| 8260
Specifications |
|
| Length |
|
| Overall |
4.25metres |
| Inlet |
93cm |
| Tunnel |
218cm |
| Outlet |
106cm |
| Width |
|
| Maximum |
184cm |
| Tunnel (outside) |
175cm |
| Transportband |
162cm |
| Heaters |
158.5cm |
| Electrical details 3 phase |
380volts |
| KW
(total) installed |
40 kw |
| Average
power use |
8.8 kw |
| per phase per hour |
|
| Maximum
power |
60 amps |
| requirement per
phase |
|
| Process
rates,t-shirts per hour |
|
| Normal
plastisol |
600 to
1600 |
| Low
temp. plastisol |
1600+ |
| Air drying water
based |
1000 to 1800 |
| inks |
|
| Heat cured water |
300 to
600 |
| based inks |
|
| Belt
speed in m/min |
0.6 to
6.0 |
|
|
|
|
