|
|
| The 8330 and 8340 Texitunnels are the same length as the 8320 Texitunnel except that they have wider heating elements. | |
| The 8330 and 8340 Texitunnels will dry t-shirts printed with plastisl inks printed on almost any automatic printer and heat fixing waterbased inks printed at a moderate speed. | |
| These dryers are designed for printers who use a large automatic printer, printing mainly t-shirts and larger cut pieces of fabric with plastisol inks and smaller quantities of water based inks. | |
| Specifications |
8330
|
8340
|
| Length | ||
| Overall | 5metres | 5metres |
| Inlet | 83cm | 83cm |
| Tunnel | 317cm | 317cm |
| Outlet | 100cm | 100cm |
| Width | ||
| Maximum | 114cm | 144cm |
| Tunnel (outside) | 105cm | 135cm |
| Transportband | 90cm | 120cm |
| Heaters | 78cm | 104.5cm |
| Electrical details 3 phase | 380volts | 380volts |
| KW (total) installed | 30 kw | 40 kw |
| Average power use | 6.6 kw | 8.8 kw |
| per phase per hour | ||
| Maximum power | 45 amps | 60 amps |
| requirement per phase | ||
| Process rates,t-shirts per hr | ||
| Normal plastisol | 900-1250 | 900-1250 |
| Low temp. plastisol | 1200+ | 1200+ |
| Air drying water based |
700-1300
|
700-1300 |
| inks | ||
| Heat cured water | 300-450 | 300-450 |
| based inks | ||
| Belt speed in m/min |
0.8-7.5
|
0.8-7.5
|
