|
|||
|
A new small dryer for hand-printers
printing with plastisol inks. This compact, low cost, high quality
dryer is ideal for setting up a t-shirt print-shop on a limited
budget. The Mini is available in 1 phase 220/240V at 20 or 25amps. This model is normally in stock. |
|||
|
| Mini Specifications | |
| Length | |
| Overall | 1.6metres |
| Inlet | 42cm |
| Tunnel | 80cm |
| Outlet | 38cm |
| Width | |
| Maximum | 81.5cm |
| Tunnel (outside) | 67cm |
| Transportband | 60cm |
| Heaters | 51.5cm |
|
Electrical details-3ph. |
380 volts |
| KW (total) | 4.9 kw |
| Average power use | 1 kw |
| per phase per hour | |
| Maximum power | 8.4 amps |
| requirement per phase | |
| Process rates | |
| Normal plastisol | 250 to 300 |
| Low temp. plastisol | 300 to 400 |
| Air drying water | 200 to 400 |
| based inks | |
| Heat cured water | 2 to 3 |
| based inks | passes |
| Belt speed in m/min | 0.2 to 2.8 |
|
|